5 Non-Toxic Ways To Clean Mould Using All-Natural Cleaners
Moulds are usually found in those specific areas of a building which you don’t visit very often, like load-bearing beams and structural supports in basement and storerooms. If mould gets into a porous surface, it slowly eats away the area until there is nothing left of it.
It may look harmless, but the structural problems it can cause in your house can be a matter of grave concern. Moreover, it can also lead to serious health issues among humans and pets. Thus, it is crucial to eliminate the problem at the earliest.
Hiring professionals for the best end of lease cleaning in Adelaide
is perhaps the best option to tackle this issue as they have modern tools and know the precise cleaning techniques to get rid of the hazard. But you need to make sure that they follow non-toxic ways of cleaning.
In other words, they must use green cleaning methods which include only natural cleaners. If you wish to do it on your own, here is a list of ways to get rid of the mould naturally and in a hassle-free manner.
How To Clean Mould With Ammonia?
Ammonia is highly effective in cleaning moulds from your house but make sure you are wearing gloves and a respirator while dealing with ammonia-based cleaning products. Read the cleaning procedure below.
First, you need to mix ammonia and water in equal proportions.
Then, pour the solution into a clean spray bottle and apply it to the affected areas evenly.
After that, let the mould killing solution settle down for around 10 to 15 minutes.
Take a small brush or something equivalent to gently scrub the mould affected area and then wipe it clean.
If you still feel that there is a possibility to clean it further, repeat the procedure.
How To Clean Mould With Bleach?
Bleach is an effective way to clean the mould, but make sure that you don’t mix it with ammonia, as it can produce toxic Chloramine vapours or fumes. Read the procedure here.
Add 1 cup of bleach in at least 1 gallon of water and mix it properly.
Then pour the mould killing solution into a clean spray bottle and evenly apply over the mould stained spots.
Take a disposable towel or a sponge to wipe off your cleaning agent from the mould tainted areas.
If required, take a bristled brush and scrub the tainted area and then vacuum or wipe it properly.
Do not wash the area where you have applied bleach. Let the bleach settle down in that spot to clean and disinfect and inhibit the growth of the mould.
How To Clean Mould With Baking Soda?
Baking soda is a basic household item, and many bond cleaners in Adelaide use it extensively. It is quite useful and at the same time, free from harmful particles. Have a look at the procedure.
First, you need to mix water and baking soda in equal proportions to form a thick paste.
Apply the paste on the affected area and allow it to settle down until it dries up. It will not only absorb the mould stains but also eliminate the dominant odour.
After that, take a small brush and scrub the stained areas gently.
Wipe away the remaining paste and along with it the mould debris. You may need a vacuum for a larger area.
Then take 1-2 tablespoons of baking soda and mix it in 2 cups of water. Mix it properly and pour the solution into a clean spray bottle.
To ensure that baking soda does not clog the nozzle of the spray bottle, shake the solution thoroughly.
Spray it over the same area that you have recently cleaned.
Allow it to settle down and then wipe it off with a clean cloth.
In case the stains are still visible, contact bond cleaners in Adelaide for deep cleaning. They have modern tools to tackle the problem and are aware of the latest cleaning techniques.
How To Clean Mould With Vinegar?
Vinegar is one of the most common kitchen commodities that we all have in our house. Read the procedure here to understand how to use it for cleaning your kitchen
and eradicate mould.
Take white vinegar and evenly spray it on the mould stains. You can also make a cleaning solution using vinegar and water.
Pour some vinegar on a disposable towel and gently wipe it on the mould covered area and let it settle down for a couple of hours so that it can get dry.
Use an old toothbrush to clean the deposit and dust. Then use a damp towel to wipe it clean properly.
If the stains are still visible, repeat the procedure.
How To Clean Mould With Tea Tree Oil?
Tea tree oil is readily available in Adelaide markets. Purchase it and follow the procedure given below.
Take one cup of water and add one teaspoon of tea tree oil in it.
Shake the solution properly and pour the mixture into a clean spray bottle.
Apply the solution on the mould affected area and wait for some time before cleaning it with a clean piece of cloth.
In case you don’t have a spray bottle, do not worry.
Dampen a disposable towel or old hand towel with this solution and apply it on the tarnished area.
Mould can cause massive damage to your property if its growth is left unchecked. And let’s not forget the health issues that can affect people who inhale the germs and bacteria it contains or come into contact with it. Thus, it is essential to get rid of mould at the earliest.
However, it is also equally important to use only natural cleaners for this purpose. It doesn’t matter whether you hire professional bond cleaners in Adelaide or do it on your own. You should always follow green cleaning to eliminate the mould from your home. This is the only way to make your home clean and healthy for breathing.