Get Wax Out of a Carpet in 6 Easy Steps

Candles are a great addition to your home decor. It not only enhances the overall ambience but can also be used when there is a blackout. But what if you discover wax on your ritzy carpet or rugs? The thought of the wax getting on your beautiful and delicate floor coverings can give you a nightmare, especially when you are in your rental apartment.

Since you have to return the apartment in its original state, you can’t take any chance. And the worst part is that most of the people ruin their carpets during the wax removal process. Due to the abrasive scrubbing practices, it is easy to damage the fibres of the floor coverings and you could make them look dull.

However, you can also opt for a detailed end of lease cleaning in Adelaide to treat the stains like wax and grease from your carpets, walls, doors and other hard surfaces. Professionally-trained cleaners thoroughly spruce up the premises for the easy retrieval of your rental bond money.

Well, there are some easy steps that you can follow on your own to get wax drips out of your carpet. The removal process is quite simple as it requires some materials you already have at your home.

So, have a look at the DIY wax removal process:

Arrange all Materials

Before starting the removal process, you need to arrange all the cleaning supplies. You should be careful while picking up the products. Make sure they are environmentally-safe and fabric-friendly. Here is the list of the things you will be needed.

• An Ice pack
• An Iron
• Paper towel or paper bag
• Butter knife
• Rubbing alcohol or non-toxic carpet cleaner
• A heavy-duty vacuum cleaner

Step 1: Blot the Surface

With the help of a paper towel, blot the drips of wax when it is fresh and warm. Act quickly if you don’t want to get into the worst phase. All you need to do is to fold the paper towel and place it on the top of the warm wax.

Now, blot the affected area gently without wiping or scrubbing the spill because this could embed the wax deep into the fibres of your carpet. This process will allow the paper towel to absorb the wax easily. Continue to blot the stop until the wax removes completely.

Tip: Do this if the wax drip is fresh or else you need to consider the following tricks.

Step 2: Use Ice Cubes to Freeze the Waxed Area

If the wax stain is stubborn, you need some smart hacks to get rid of it without even damaging your carpet. To make that happen, put an ice pack on the spot. You can also wrap it in a towel to prevent the wax from getting wet.

The purpose here is to cool it down so that you can easily remove them from the carpet without any elbow grease. Many professional cleaners in Adelaide use this trick when it comes to removing wax from floor coverings naturally. You can also try out this hack and get rid of candle wax on your own.

Step 3: Scrape it Off Using a Butter Knife

This step is all about removing the frozen wax from the carpet. You just need a butter knife so that you can scrape off the wax stain. If the wax is frozen enough, you will be able to get it out with just a single turn.

And if the stain still persists, consider the fourth step. The following will make your work easier without even letting you use harsh products on it.

Step 4: Iron the Wax

This is one of the crucial steps because it will help you remove the wax residue quickly and easily. You can begin by putting a paper towel or a paper bag over the affected area.

Turn on your iron at a minimum temperature – make sure the iron is not too hot as it could melt your carpet’s fibre. Also, don’t use a steam setting. Try to keep it at a low temperature.

Now, run the iron on the towel, which has been placed over the wax stain. This will help you transfer the wax on the towel in minutes. So, you just need to keep changing the position of the towel on clean areas. You can repeat this process until the wax fully transferred to the bag or towel.

Step 5: Deep Clean your Carpet

First, remove the wax residue or other stains from your floor coverings. You can either use a non-toxic carpet cleaner or rubbing alcohol but avoid using a market-based cleaning solution. Due to the availability of harsh chemicals, it can damage the fibres of your carpet.

So, stick with rubbing alcohol, which is also known as Isopropyl alcohol. Being an antiseptic and anti-bacterial ingredient, rubbing alcohol can be used to clean windows, carpets, toilet bowl to remove grime and grease.

It works wonders when it comes to eliminating sticky substances like chewing gums and sap from carpets and other hard surfaces.

How to Use it?

• Apply the rubbing alcohol on the affected area of your carpet.
• Blot it with a clean microfiber cloth.
• Press down until the stain gets vanished.
• You can also leave the solution for 10 minutes for better results.
• Don’t forget to blot the surface to get rid of moisture.

Tip: Hire trained carpet-cleaners in Adelaide if you want a professional steam cleaning for your floor coverings. They will make it look new again without even using harmful chemicals.

Step 6: Vacuum Cleaning is Must

Once the floor covering gets dry, you can thoroughly vacuum clean it to remove dust and grime. For better outcomes, attach a soft brush with your machine and rotate in a circular motion. Do this to fetch the accumulated dust, wax residues, grime, hair dandles and other loose dirt.

Make sure you do it in the right way as this will help you restore the lost shine and texture of the carpet easily.

A DIY Tip: Prepare A Carpet Cleaner At Home

Instead of using expensive carpet cleaners or stain removers, you can prepare a natural cleaner using some fantastic household ingredients at home. First of all, add one part of the rubbing alcohol with one part of water into a spray bottle. Then add the liquid dishwashing detergent and mix it well. Make sure all the ingredients are combined correctly.

Now you can use it whenever you want to treat carpet stain. This is one of the best homemade solutions that work wonders on fabric furniture, rugs and upholstery. For sparkling results, spray the solution on the stain and let it sit for 10 minutes. Isn’t it fantastic?

Endnote

This article is all about knowing the right ways of getting wax out of carpet without any damage. Use these simple yet effective methods and restore the look of your floor coverings. If you found this information helpful, you can share it with your friends and family too.

In case, you want professionals for a thorough end of lease cleaning in Adelaide, then look for the company that can spruce up the entire property from top to bottom according to the pre-approved checklist. They can help you secure your full bond money without any hassle.