How To Remove Hard Water Stains from Bathroom Floors?

shape shape shape shape shape shape
bathroom decorated with stone tiles and tub with jute basket

How To Remove Hard Water Stains from Bathroom Floors?

By : Jessica Williams

Hard water contains magnesium and calcium particles and thus can leave stains when mineral-rich water vaporises leaving behind a smudged deposit on the surfaces. Once the water dries out, it leaves the deposits on the surface. Mostly they are found on the bathroom floors. Watermarks and spots can ruin the look of your bathroom.

The bathrooms get dirty very often. You use expensive tiles on your bathroom floor, but with constant exposure to hard water, it gets blemished very easily. These stains are so stuck on the floor that they cannot be removed easily. Eradicating the water stains can give your floor a makeover so that it looks nearly new again.

Bathroom cleaning is a tiresome task, and if you have hard water stains on the floor, then it becomes nearly impossible to remove them. And in case you have to return the property to your landlord, bathroom full of stubborn water stains can be risky in getting back your bond money.

Therefore the best advice is to hire skilled cleaners for it. Bond Cleaning Adelaide is the expert on the end of lease cleaning in Adelaide. They have specialists in well-proven cleaning techniques. It is imperative to have the right cleaning technique as harsh cleaners or chemicals can scratch the tiled floor, but mild household items can dissolve water spots without harming the surface.

If you’re looking for some effective tips how to clean hard water stains, you can solve the problem with some natural cleaners:

Mild Acids

Mild acids works best in this case. The hard water deposits are saltlike in nature. Due to this property if you pour acid on the hard water deposits, they get softened and start to suspend. But do not use harsh chemicals according to the set standards, as many acids are crude in nature and properties. Hence it advised to use mild acids.

Distilled White Vinegar

Vinegar works well on removing the stains from the floor. Vinegar has the acidic quality that helps in removing the mineral deposits of water. Use the vinegar in distilled form. Damp a sponge in white vinegar. Wipe out the floor with it. Let the vinegar sit for a significant amount of time as it will help in softening the residue. Use one cup vinegar per gallon of water. However, do not use it for marble tiles floor, as that requires a mild soap or specially formulated marble cleaner.

Baking Soda

Baking soda works best in removing such stains. The chemical properties of baking soda removes any kind of residue or soap scum on the floor or tiles and make the bathroom floor new and sparkling again. All you need to do is spread baking soda on the floor. Scrub the surface using a wet sponge to let the baking soda work into the stains like a cleaning powder. Rinse it off with clean water afterwards. If water spots are still visible, then repeat the process. And when it is cleaned, dry it out using a towel to avert minerals present in water leaving fresh spots.

Wiping and Mopping

Use a clean mop for the floor. Scrub the stone tiles and use a stiff brush to remove the watermarks wedged on the uneven surface of the tiles. However, do not use a harsh scrubber. Always use clean water for mopping. Also change the water every time for next mopping. Dry it out immediately as the standing water also adds a lot of new marks.

Making Your Own Cleanser

It’s not necessary to buy a cleaner every time. If you take a look around your house, you will get some ingredients with which you can make your own cleaner and that too an effective one. Take ingredients like lime juice, baking soda, vinegar and salt. Mix all these ingredients well and a paste will be ready. This is your new effective bathroom cleaner. So take some unused clothes and a scrubber and start cleaning out your bathroom. Cleaning in the morning before shower is the best time to start it.
Squeegee resolve Stains

If you want to remove the water stains, then invest in a good quality squeegee. Make sure it has a high-quality rubber blade. After each time you shower or use your bathroom, use the squeegee to clear out all the remaining water from the floor and the walls. This will work like a window washer cleans a glass. Try to let flow all the water into the ditch. There will be no hard water stains if there is no water on the floor to evaporate.

Routine Cleaning

Rugs at the entry of the bathroom will help in spreading the water all around. Keep mats in the areas such as near the sinks, washbasins or tubs where water splashing occurs. Always wipe up water spills immediately with a towel. Also, mop the floor at least once a week with tile cleaner and rinse off with water.

Wipe down the walls of your bathroom after every use. Use a soft towel to wipe the moisture from the walls as it will prevent the build-up of soap foam as well as hard water stains. Before they become stern, clean hard water stains from the tile and floor as soon as you notice them. The longer that water spot lingers on your surface, the harder they can become to remove, so treat them as soon as you detect them.


Hard water stains are the most stubborn marks, and it is tough to get them removed from your bathroom surface and walls. Carrying out a cleaning regime and following some instructions can help in removing them. However, it’s difficult to keep up with a cleaning regime with the busy schedule we keep.
In a city like Adelaide, it’s not easy to take out time for bathroom or house cleaning. Hence the best way to remove the hard water stains for your bathroom is to get the help of professionals and experienced cleaners like Bond Cleaning in Adelaide. They have green cleaning methods and will make your bathroom look new and shining again.