DIY Toilet Bowl Cleaner Tablets

The common ingredients of store-bought toilet cleaners are ammonia, bleach, butylated hydroxytoluene, and volatile organic compounds.

All these are categorised as hazardous chemicals that can cause respiratory disorders, skin irritation, and other chronic diseases.

If you are concerned about your family’s health, start cleaning your toilet using all-natural cleaning products. Here is a guide to help prepare DIY toilet bowl tablets with non-toxic ingredients. The best part is that these tablets can eliminate unpleasant brown stains, hard water stains, and grime from the toilet bowl.

Whether sprucing up a rental property in Adelaide for the final inspection or performing a routine clean-up, prepare the chemical-free tablets to clean your toilet bowl like a pro.

Let’s Get Started!

Key Ingredients You’ll Need

You don’t need to rush the market to get fancy or expensive ingredients for DIY cleaning tablets. Some of the products are available in your kitchen pantry. So, you will need:

1. Baking Soda

Baking soda is the most powerful cleaning agent with disinfecting, stain-removal and deodorising properties. It is mildly abrasive and can fight against rust stains and bad odours with ease.

2. Citric Acid

It is also a natural cleaning agent that can help tackle stubborn stains, mineral deposits, and soap scum from different surfaces. The best part is that it won’t cause damage or leave toxic fumes behind.

3. Distilled White Vinegar

Highly-trained cleaners who offer bond cleaning Adelaide prefer white vinegar over any ammonia-based cleaner. It is a great natural cleaning product that can restore the shine of your toilet bowl without a lot of elbow grease.

4. Essential Oils

Though this is optional, adding a fresh fragrance of essential oils can make a huge difference. It can help you banish unpleasant odours- leaving your bathroom smelling fresh again.

List of Supplies You’ll Need

You will need the following supplies to prepare all-natural toilet bowl cleaner tablets at home:

A Bowl and whisk: Opt for a large bowl to mix all the ingredient

Measuring Spoons: It is good to measure white vinegar and citric acid because excessive acid can cause damage to the surface.

Silicone Ice Cube Tray: It is used to freeze cleaning tablets

Tip: Keep a jar with you to store extra tablets and use them whenever needed.

Step-by-Step Guide to Prepare Toilet Bowl Cleaner Tablets

The making process is super-easy and convenient. Make sure you follow it step-by-step as mentioned below:

Step 1: Mix Ingredients

Mix 3 tablespoons baking soda and 2 tablespoons citric acid in a bowl. Use a whisk and mix both ingredients properly. You can use the duo cleaning agent to clean pebble shower floor as well.

Step 2: Add Distilled White Vinegar

Now, add 1 teaspoon of white vinegar to the bowl. Mix ingredients simultaneously and add more quantity of vinegar as per your requirement. This can create fizz or produce carbon dioxide gas. So, do it slowly and steadily.

Step 3: Add Essential Oils (optional)

Do you want to banish bad odours from your bathroom? Add a few drops of your favourite essential oil. This can be a tea tree oil, lavender, rose, etc.

Step 4: Pour or Scoop Mixture into a Tray

In this step, pour your DIY cleaning mixture into your ice cube tray. This will help you get the product in tablet form.

Step 5: Set Aside the Tray

Let the ice cube tray sit for at least 2-3 hours. Remove them from the tray when they feel hard and sturdy to touch.

Step 6: Collect Your Tablets

Remove toilet cleaning tablets from the silicone tray and store them in air tight container. However, if you are vacating a rental property soon, book experts for a quality bond cleaning Adelaide and get your bond back. They clean every nook and cranny, including toilets, according to the proven checklist to help pass the rental inspection.

How Do DIY Toilet Bowl Cleaner Tablets Work?

You can use these homemade cleaning tablets to remove soap scum, hard water stains, grime, rust and other marks from your toilet bowl. These tablets can disinfect and deodorise as well. You just need to:

Drop two tablets into the toilet bowl.

Let it dissolve completely. The baking soda, citric acid, and white vinegar work together and break down stubborn stains from the surface.

Take a toilet brush and scrub the area. Do not leave edges and crannies.

Allow it to sit for 10-20 minutes to tackle hard water stains.

Flush the toilet and repeat the process if required to maintain housing standards , especially for your bathrooms.

Quick Tip: For a quality end of lease cleaning Adelaide, search for the best experts because they can precisely clean all rooms, contaminated surfaces and stain-laden areas.

Wrapping up

You don’t need to understand science when preparing these super-easy DIY toilet bowl cleaner tablets. Combine all-natural ingredients in a bowl, scoop them into a silicone tray and let it freeze. Tablets will be ready to help remove hard water stains, rust, grime and bad odours from your toilet seat.